10 Best Engine Swap For Scion Frs 2022

There is no shortage of engine swaps for the Scion FR-S. The most popular options are the Subaru BRZ’s FA20 boxer engine or the Toyota 86’s 2.0-liter flat-four. Other engines that can be swapped in include the LS1 V8, the SR20DET, and the Mazda MX-5’s Miata engine. Which engine you choose will depend on your budget and what type of driving you plan to do.

A Shortlist Of The Best Engine Swap For Scion Frs

Here is a quick recap of our top 10 picks that lets you compare each phone with another and allow you to choose the best one.

Top 10 Best Engine Swap For Scion Frs You Should Go For In 2022

Bestseller No. 1
YJYWZH Double Layer Consoles Armrest Box for to yota 86 Gt86 Subaru BRZ Armrest Storage Box Scion FR-S 12-20 (Black with Red Line)
  • Tough, durable and waterproof PU leather armrest, One-piece design, design for special car model
  • 3 usb charging port at front , more convenient to charge with the phone or laptop, when charging , the usb port will have blue light bright
  • Double layer design, have mezzanine , middle layer can put mobile phones, cigarettes. Large storage boxes can store more things and increase capacity
  • One-piece design, more suitable for the original car arc, easy to install, can be directly inserted into the mounting hole, no need screw
  • Quality guarantee, fast shipment, 24-hours after sale service, anything problem contact us
Bestseller No. 2
BILT HARD 7HP Gas Engine Horizontal Shaft, 4-Cycle 212cc OHV Industrial Grade Replacement Gas Motor, Shaft 3/4" (19mm) Diameter, 2-3/8" Long, 3/16" Keyway
  • Industrial Grade: Provides powerful strength to get the job done, Fuel Shut Off and gas saving overhead valves. Easy-reach recoil starter system with auto-decompression.
  • Shaft Size: 3/4" Diameter, 2-3/8" Long, end tapped with 5/16"- 24 UNF; Keyway 3/16"; Mounting pattern 6.40" L x 2.95" W - 3.17" W.
  • Replacement: for 6/6.5/7/7.5 hp Honda/Yamaha/Kohler/Briggs & Stratton/ Engine, applicated with go kart, pressure washer, cement mixer, compressor, log splitter, vacuum, water pump, chipper shredder, mini bike etc.
  • Powerful Engine: EPA compliant, max torque 8.1 ft.-lb @2500 RPM, Max 3600 RPM speed, 7 horsepower, 0.9 gal fuel tank.
  • Kindly Noted: it may touched oily, as oil tested before packaging, 100% new. (engine oil Not included)
SaleBestseller No. 3
GOOACC 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler
  • UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
  • SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
  • HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
  • MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
  • EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
Bestseller No. 4
MSCRP LS Throttle Body Bypass Hose kit LS Coolant / Steam Port Crossover Hose Kits
  • Compatible with all GM LS series engines
  • Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE,and 1 steel braided hose .
  • Can be installed on the front or rear of the cylinder heads
  • Thread sealant NOT included
  • not compatible with FAST 102 intake manifolds
Bestseller No. 5
Castrol 03124 Edge 0W-20 Advanced Full Synthetic Motor Oil, 5 Quart
  • 42 Percent Better Rating On Fighting Power Robbing Deposits
  • Superior Engine Protection Vs Conventional And Synthetic Blend Oils
  • Superior Performance Against Deposits, Wear And Oxidation; Bottle Color: Black
  • Meets The Needs Of Honda, Toyota, Acura, Lexus And Other Vehicles Where 0W-20 Grade Is Recommended
Bestseller No. 6
ICT Billet SBC Vehicle to LS Engine - Motor Mount Adapter Plate - Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet 551628
  • Made with OEM specifications for the best possible fitment into your vehicle
  • These plates will move the crankshaft centerline up .17" in the vehicle
  • Made in Wichita, Kansas from aerospace grade, USA produced, 3/8" billet aluminum
  • Includes: 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts (plates are M10 threaded, use the hardware included)
  • Natural aluminum finish
SaleBestseller No. 7
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool-Black
  • Classic design, fast scan and erase trouble codes, even a beginner can use it read the error code, find out what the problem is and perhaps fix it. Save money and time. It can not read and erase ABS, SRS(Airbag), and other systems fault codes.
  • Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
  • Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
  • The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
  • It's equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.
Bestseller No. 8
Mobil 1 Extended Performance Full Synthetic Motor Oil 0W-20, 5 Quart
  • Mobil 1 Extended Performance full-synthetic motor oil 0W-20 helps protect critical engine parts for up to 20,000 miles between oil changes,* controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
Bestseller No. 9
for LS Swap Motor Mounts Adapter Plates LS Conversion Adjustable Universal Swap Bracket Small Block for LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 551628 for SBC Vehicle to LS Engine
  • FUNCTION: Our brackets allow a LS series engine to be bolted into a vehicle which originally has a small block chevy engine with your existing mounts.
  • GREAT DESIGN: These are made with OEM specifications for the best possible fitment into your vehicle. They will move the crankshaft centerline up .17 inches in the vehicle.
  • PACKAGE INCLUDES: 2 X Adapter Plates, 8 X Flat Head Bolts, and 6 X Flange M10-1.5 Bolts (The plates are M10 threaded, use the hardware included)
  • No Grinding Necessary for A Flush Fit: Our Swap motor mounts for LS have a necessary opening milled out of the center of the plate to clear the hump on the backside of your SBC/BBC motor mounts.
  • SUPERIOR MATERIAL: CNC milled from aluminum to provide the most accurate adapter plates available.
SaleBestseller No. 10
Car Retainer Clips, 415pcs Plastic Fasteners Kit with Fastener Remover, 18 Most Popular Sizes Auto Push Pin Rivets Set for Toyota, GM, Ford, Honda, Acura, Chrysler
  • 【415 Pcs Push Retainer Kit】These Fasteners Clips Cover 4mm to 10mm hole sizes. These push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement.
  • 【Well Made and Not Break】Impact resisitant auto push rivets, made of durable PA plastic, strong top. Robust and vibration resistant. These car retainer clips kit would not break or crack easily during use.
  • 【Great Value & Saving Time】Up to 415 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
  • 【Fastener & Panel Removal Tool】Remover tools allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • 【Easy Storage and Satisfaction Guarantee】Comes with a plastic box with 18 compartments for organized storage. Please check the model to make sure these items are what you need. Our product enjoys 45 days money-back, please feel free to contact us if there's any issue.

How To Choose The Best Engine Swap For Scion Frs

Take the following considerations into account to choose the best engine swap for scion frs that meets your needs.

When purchasing a new engine for a Scion FR-S, it is important to make sure that the engine you choose is compatible with the car. Some of the most common engine swaps for this type of car include a V8 or an FWD. Be sure to read reviews before making your purchase to ensure that you are getting the best engine possible.

Related Frequently Asked Questions

Can You Put A 2Jz In A Scion Frs?

Yes, a 2JZ in a Scion FRS can be put into drive.

What Engine Can You Swap Into A Toyota 86?

There are many engine options that can be swapped into a Toyota 86. Some of the more popular engines that can be swapped into a Toyota 86 include the 1.8 L DOHC ABC engine, the 2.4 L F4E engine, and the 3.7 L V6 engine.

What Engines Can Fit In A Gt86?

The Gt86 can be fitted with a variety of engines.

How Much Does It Cost To Ls Swap 86?

There is no exact answer to this question since LS swaps vary in price. Generally, it costs around $1,000 to LS swap an 86 model car.

Final Thoughts

If you are looking for a reputable engine swap shop to do your Scion FRS, we highly recommend our friends at ‘Best Engine Swap’. They have been doing quality swaps for many years and are consistently top of the line in terms of customer service. Overall, our experience with Best Engine Swap was positive and we would definitely recommend them to anyone looking to get a good quality engine swap done right.

Similar Posts

Leave a Reply

Your email address will not be published.